de Tomaso Pantera Electronic Brake Switch, Tachometer Adapter, Electric Parking Brake
PRODUCTS
Copyright © 2025
Brake light Switch Sensor is a non-
contact switching device that
connects directly to the factory wire
harness to activate the brake lights.
The Panteras factory hydraulic
switch fails slowly requiring higher
levels of hydraulic force. The brake
lights should activate in advance of
developing any brake pressure.
This non-contact brake switch uses a semiconductor magnetic
sensor to detect the travel of the brake pedal and a
semiconductor switch activates the brake lights. The brake lights
can be incandescent or LED or combination of both.
Since there are no springs or contacts as typical brake switches
the repeatability is superior.
A unique feature retains the brake
lights active for 2 seconds after
the brake pedal is released.
The 2 second time allows the foot
to move from the brake to
accelerator while the car is not in
motion.
Brake Light Switch
Part # BLS, Price $49.00 USD
> Designed especially for
the Veglia tachometer.
Converts ignition system
pulses to trigger the Veglia
tach.
> Compatible with most
ignition systems and ECU's.
> Includes an integrated LED
bargraph display as a RPM
reference tachometer, 1,000
to 10,000 RPM in 1000 RPM
increments.
> Additional connection for
electric choke or relay for
operating electric fuel
pump.
> Replaces MSD-8920 wire
for wire.
Tachometer Adapter
Part # TA-01
Price $101.00 USD
This installation is
with large after-
market brake
calipers. The
hydraulic calipers
were moved to the
forward mounting
upright holes.
The brake line was
replaced with a
longer line as well.
Pantera
Electronics
installation kit
provides the 2
wire cable and
proper connectors
to complete the
installation.
Pantera Electronics
aluminum mounting
brackets for the
Tesla / Brembo
Model S calipers
with plated high
strength hardware.
Pantera Caliper Mounting Kit
Includes brackets and hardware
P/N: CMK-01
Price $95.00 USD
