EPB Installation Kit
for 2 terminal
calipers.
Part # 2FC-KIT
Price $40.00 USD
Electric Parking Brake Controller
Electric Parking Brake Controller - Standard
for (2) rear electric brake calipers.
Two types of functions
Pushbutton:
Momentary button press, calipers close.
Press again, calipers open.
Hand Lever:
Lift hand lever, calipers close.
Lower hand lever, calipers open.
PRODUCTS
Copyright © 2026
Dual color push-button for EPB controllers
TYPICAL EPB CONTROLLER OPERATION
> When the push-button is pressed, the calipers
close until a specific pressure is attained then the
push-button indicator illuminates red.
> When the push-button is pressed again, the
calipers open to a specific distance and the push-
button indicator illuminates green.
Push-Button Switch
Internal red/green LED
Part # PBS-R/G
Price $40.00 USD
Installation Kits for EPB controllers:
Includes 25 feet of 16 AWG cable, caliper
connectors and terminals.
EPB Installation Kit
for 4 terminal
calipers.
Part # 4FC-KIT
Price $49.00 USD
The EPB Controllers are compatible with
most electric parking brake calipers:
Wilwood, Tesla, GM, Ford, Audi,
CompBrake and others.
For over 6 years Pantera Electronics has designed and manufactured
several types of electric parking caliper controllers for many applications.
New >> Single Caliper Electric Parking
Brake Controller. For drive train or drive
shaft mounted electric parking brake
calipers.
Straight forward push-button control for
activation.
Electronic adjustment of caliper opening
distance.
Output for E-brake dash lamp.
Electric Parking Brake Caliper Controller
for push button switch
Part # EPB-PB/1ch
Price: $272.00 USD
Electric Parking Brake Controller - Standard
Part # EPB - STD, Price $290.00 USD
Electric Parking Brake Controller - Advanced
Part # EPB - ADV, Price $330.00 USD
New Advanced EPB Controller
Electric Parking Brake Controller - Advanced
for (2) rear electric brake calipers.
Caliper activation from the following:
Push-button Switch
Brake Hand Lever
+12 Volt Signal
Ground Signal
Advanced Features:
Adjustable caliper pressure.
Adjustable caliper open distance
Brake pedal enable
Output for E-Brake dash lamp
Caliper not included.
Pantera Electronics
aluminum mounting brackets
for the Tesla / Brembo Model
S calipers with plated high
strength hardware.
This installation is
with large after-
market brake
calipers. The
hydraulic calipers
were moved to
the forward
mounting upright
holes.
The brake line
was replaced with
a longer line as
well.
Pantera Electronics installation kit provides the
2 wire cable and proper connectors to complete
the installation.
Pantera Mounting Kit for Tesla Model S EPB caliper.
Includes brackets and hardware
P/N: CMK-01
Price $130.00 USD