This copper/brass radiator is a look-alike replacement for the OEM factory radiator.
 de Tomaso Pantera Radiator with Fans
PRODUCTS
FUSE PANEL IGNITION SWITCH HEADLIGHT / MOTOR RAD FAN CONTROLLER RADIATOR AND FANS AIR CONDITIONING CONSOLE SWITCH INTERFACE GAUGE CONNECT SYSTEM ROCKER SWITCHES WINDOW SWITCHES GEN LIGHT RESISTOR PARKING BRAKE CONTROL DUAL USB CHARGER SIPEA REPLACEMENT RELAY LED GAUGE LAMP LED DOME & LED FOOTWELL LED SIDE MARKER LAMPS LED DR COURTESY & JAMB LED LICENSE PLATE LAMP LED SIGNAL LIGHTS LED TAILLIGHTS GROUP4  LED LIGHTS LED SIGNAL FLASHER ALTERNATOR KIT BRAKE SW & TACH ADAPTER ELECTRICAL COMPONENTS WIRE HARNESS
Copyright © 2024
an Engineering Company Merging Automotive and Electronic Technologies PANTERA ELECTRONICS
Compact position of the fans allows for ease of installation and space for air flow. Fan brackets mounted inside of the radiator frame uses less space. Brackets are aluminum and tapped for ease of assembly.
Separate elbows allow positioning in any direction for optimum installation.     (elbows are not included) Aluminum reinforcement for added weight of the fans. Entire assembly utilizes stainless steel hardware through out.
Brass stop-cock for air vent/bleed. Standard 22mm sensor port for coolant temperature sensing. Factory OEM size coolant inlets and outlets. Repositioned cross-flow baffle for best flow characteristics. Proprietary 3 row copper core with tubes for optimum flow and fin density correct for the fans.
Radiator with Spal Fans, Brackets, Hardware etc. Part #  RWF-01 Price: $2032.00 USD Radiator only Part #  ROF-01 Price: Contact Factory Note this price is for customer supplied radiator for upgrade. If a factory radiator is not available contact Pantera Electronics.
This is a customer supplied upgraded radiator. The supplied radiator is disassembled and restored with new redesigned components. All of the original radiator components are cleaned and professionally prepared for the assembly. All brass components are silver soldered for maximum strength. The assembly is preformed by a professional specialist in radiator construction, contracted by Pantera Electroincs. The final assembly with fans is completed by Pantera Electronics.
Compact width without shrouds allows improved cooling due to air flow over all copper and brass surfaces. Heat transfer is increased even without fans in operation.
We are the only supplier of all 3 cooling components
INSTALLATION MANUAL CRITICAL CONTROLS LED LIGHTING SUPPORT HOME RECOMMENDATIONS HOW TO ORDER