ato

ATO Fuse Panel

>> 12 ATO blade fuses plus 2 additional ATO fuses for the power windows, this eliminates the fuse box with 2 fuses mounted on the wheel housing. A total of 14 ATO fuses in the same footprint as the original 12 fuse panel.

>> Mounting foot print is identical to the original and utilizes the original 5mm mounting screws and plastic insulation shim.

>> Quick disconnect terminals are labeled with wire color and function to help de-bug wiring problems.

>> ATO fuses are labeled on the fuse panel with circuit number and current rating.

>> Each fuse has a red LED indicator for "open" fuse condition. (note that the protected load must be active or "on" for the LED to operate)

>> Quick disconnect terminals are geometrically positioned similar to the original fuse panel, transferring one wire at a time to minimize installation problems. "EXTRA" terminal marked for an additional accessory.

>> Electronic noise suppression devices for each fused circuit to minimize electrical noise.

>> Rugged, open frame construction to dissipate heat, designed with high quality non-flammable materials: aluminum, copper, brass, steel, glass impregnated fiber board and electronic grade solder.

>> ATO automotive fuses were designed for the automotive industry and are readily available in Europe, Canada and U.S.A.

>> Price includes fuse panel with fuses installed.

ATO Fuse Panel with Integrated Voltmeter

The ATO Fuse Panel / Voltmeter has
the ability to monitor the voltage on a
bargraph in an expanded format to
allow accurate measurement and
alarm. The end LEDs are red
indicating a problem, while the mid
section is green to indicate a correct
voltage range with intermediate
voltages indicated by yellow and
amber LEDs. An audio alarm is
initiated when the red LEDs are
illuminated to provide immediate
warning of a problem. The alarm is a
short tone at 3 second intervals and can
be disabled by moving a jumper from
the "ON" position to the "OFF" position
on the back side of the fuse panel.

The voltmeter bargraph has 10 LEDs
each one represents 0.5 volts from
10.5 to 15.0 volts, a single illuminated
LED indicates the voltage level. There
is a voltage scale next to each LED on
the bargraph to identify the voltage.
The voltage of an automotive
electrical system will vary typically
from 11.5 to 14.5 depending on many
factors, but there are limits of
operation and conditions that should
be avoided. Excessive high voltages
are harmful to the battery and the
electrical components of the Pantera.

See Video Demo with
"Navigation" Button

Key Switch Operation Indicators

The Panteras electrical system is monitored on the "Accessories" side of the ignition switch at the most reliable point, the fuse panel distribution. There are 2 green indicators, one for the "+" voltage from the "Accessories" position of the key switch and the other for the "+" voltage from the "Ignition" position of the key switch.

>>>>>>>